Get a quote
01223 890727 enquiries@theglobegroup.co.uk
Editorial cover image for article on roof access design for ongoing maintenance
Roofing

Roof Access Design for Ongoing Maintenance on Multi-Storey Residential Blocks

Roof access on multi-storey residential blocks is designed for the initial construction phase and then often forgotten. The maintenance access that will actually be needed over the building's forty-year service life is a separate design consideration, and one that gets left too late on many developments.

Why maintenance access on multi-storey blocks is often undesigned

The core question is how the roof will be accessed for planned maintenance activities after handover. Gutter cleaning. Solar panel inspection. Chimney maintenance. Antenna installation. Inspection of flashings after storm events. Each is a routine activity that will happen over the building's life. Each requires safe access.

Where roof access is not designed in, the default position after handover is that facilities managers arrange scaffold or MEWP hire for each maintenance visit. Scaffold hire on a five-storey block costs meaningful money for a two-hour gutter clean. MEWP hire is quicker but not always feasible depending on ground access. Repeated over decades, the cost of designed-out roof access is significant.

Designed-in roof access options include man-safe fall arrest systems (permanent horizontal safety lines), designed anchor points at strategic locations, roof access hatches with ladder or stair access from inside the building, and permanent guardrail edge protection to defined maintenance zones. Each has different cost implications and different maintenance implications.

The designed-in access options and their trade-offs

Globe Roofing's engagement with residential developers at design stage includes a conversation about the intended maintenance access strategy. Where the building is a five-storey block owned by a housing association with long-term maintenance responsibility, the calculation favours designed-in access. Where the building is a two-storey house being sold to individual purchasers, the calculation typically does not.

There is a specific issue around fall arrest system maintenance itself worth flagging. Permanent horizontal safety lines require periodic inspection (typically annual) to remain certified. Where the developer installs the system but does not put a maintenance contract in place, the system quietly falls out of certification and the users cannot rely on it.

The interaction with the building's insurance is another consideration. Building insurance policies increasingly ask about the maintenance access provision for the roof and the safety systems in place. Where the answer is that maintenance is done from a hired scaffold with no permanent systems, some insurers apply higher premiums or specific exclusions.

The commercial case for designing access in at build stage

Retrofitting roof access to an existing building costs significantly more than designing it in at build stage. Cable trays or anchor points added to a completed roof involve waterproofing detail work, structural checks of existing steelwork, and often scaffold access to install what should have been installed during the original build. Every retrofit costs multiples of the original design cost.

For housing associations building new stock they will retain long-term, roof access design at the specification stage of the scheme is one of the higher-leverage decisions on lifecycle cost. A modest capital investment at build stage saves substantial operational cost over the building's life. The calculation favours designing in.

For principal contractors and QSs on multi-storey residential schemes, the roof access decision is worth raising specifically at design review rather than left to the roofing package specification. It affects the roofing scope, the fabric package, the building services layout, and the eventual maintenance strategy. Coordinating it early is much cheaper than fixing it later.

Talk to Globe Roofing

To discuss roof access design for ongoing maintenance on your scheme, contact Globe Roofing on 01223 890727 or email enquiries@theglobegroup.co.uk.

Keep reading

Related insight

Planning the roofing package on a development or a regeneration scheme?

Complete the form and one of the team will come back to you.